Our Services

Clean away grease, dirt and oxidation to prevent any battery problems in the future. A filthy battery connection will weaken the charge overtime

During a brake inspection the entire brake system is checked; this includes the following: the brake pedal, brake fluid, brake lines and hoses, and the brake assemblies (whether they are disc brakes or drum brakes). Parking brakes should also be checked at this time.

By keeping the brake fluid clean, you avoid extreme damage to the important brake componentes such as: ABS (Anti-Lock Brake Systems), Master Cylinders, Wheel Cyls, Brakes Calipers, Metering & Proportioning Valves.

A catalytic converter is an emissions control device that converts toxic pollutants in exhaust gas to less toxic pollutants by catalyzing a redox reaction (oxidation or reduction).

In simple terms, decarbonising an engine involves removal of carbon deposits from the engine, using either mechanical (physical) or chemical methods.

Injectors can create a bundle of very costly problems and situations. They not only can damage your engine but they can also create a big hole in your packet. You can avoid poor milage and performance for a few dollars

To prevent any loss of power or worse, a bent connecting rod, get a fuel induction clean-up.
The connecting rod to the left was the victim of a leaky Injector. Perfect example when you neglect $150 worth of maintenance and end up with a $1000 repair.

They need to be reversed flush & clean every 3 years or 30,000 miles.
Some of the reason are: Corrosion (Chemical Attack), Errosion (Sand blast on soft metals), Contamination (Oil, Metal shaving & Emission residue), Chemical unbalance (High or low PH levels(Alcaline or Acidity))

If you notice a clicking noise while turning, you might have an issue with your CV Joint which can lead to bigger prolems

This item is just as important as any other moving part. They have gears, valves and they got contaminated also. If the power steering is free of oil and dirt, you will never have to worry about leaks, contamination and that dreadful "morning sickness"

Have you ever had your steering wheel pull or wander as you brake or accelerate? Having your wheels aligned will prevent uneven wear on your tire & correct steering.

Your transmission should be flushed and cleaned at least every 3 years or every 30,000 miles. Your transmission accumulates dirt and metal shavings due to extreme heat & friction.

The suspension system keeps the from bouncing too much and controls what goes on between the tires & the road. Keep control of your car & avoid damage to your frame & rims.

Keep cool this summer. Make sur your A/C is running efficiently and ask about our cabin filters. A clean cabin filter can increase performance and remove odor while feeling a cool air.

Cabin filters catch dust, pollen & other materials that can make riding in a car unpleasant. It should be replaced every 12,000 - 15,000 depending on driving environment.